उत्पाद विवरण
नाम | 2 AXIS CNC PIPE CUTTING MACHINE | |||
मोडेल | CNCUT-P250-ST | CNCUT-P500-ST | CNCUT-P250-SE | CNCUT-P500-SE |
Chuck And Motor Style | 86 Series 120 Step Motors + Worm Gear Box | 750W Panasonic Servo Motor + Reduce Gear Box | ||
Input Power | Single Phase AC 220V | Single Phase AC 220V | ||
Approximately 800W | Approximately 1000W | |||
PipeLength | Produce according to clients' demand | Produce according to clients' demand | ||
Size Of Chuck | φ250mm | φ250mm + Connected Jaw | φ250mm | φ250mm + Connected Jaw |
पाइप व्यास | φ50~φ260 mm | φ50~φ500 mm | φ50~φ260 mm | φ50~φ500 mm |
Max. Weight Of Pipe | ≤250 kg | ≤600 kg | ||
Customizing | Please contact ZHAOZHAN's salesman if you have any other pipe length, weight, diameter demand. We will supply you Fully customized programs | |||
Cutting Modes | Plasma Cutting (Working with plasma generator) and Flame Cutting replacement used | |||
Reduction Ratio | 1:21 (might be changed) | 1:175 (might be changed) | ||
Max Pipe Rotate Speed | 0-10 rpm(can be adjusted as special demand) | 0-15 rpm(can be adjusted as special demand) | ||
Ovality Of Pipe | ≤2% | |||
Numbers Of Pipe Supporter | Supply according to real pipe situation | |||
Auto ControlledAxis | Two-axis linkage | |||
Torch Lifting Distance (Z) | ≤210mm | |||
Working Precision | ± 0.2 mm / meter | |||
Flame (Gas) Cutting Thickness | Piercing Capacity: 5 - 60 mm | |||
प्लाज्मा काट्ने मोटाई | Depends on the cutting capacity | |||
Plasma THC | वैकल्पिक | |||
ग्यासको चाप | Acetylene Gas or Propane Gas Max 0.1Mpa | |||
Oxygen Pressure | Oxygen Gas Max 0.7Mpa | |||
तालिका काटना | Separated with main machine. Cutting table and pipe supporters and chuck will be supplied. | |||
Product Details
1.It is used gantry style design, which is parallel to the pipe. The tractor with lifting tool installed on the gantry beam. The pipe fix by chuck jaw, and with movable and adjustable pipe supporters which on the rails and under the pipe.
2.When cutting, CNC control system will control the tractor move and pipe rotate, to cut the pipe. Whole machine work stability and can be long term used. Easy operation and high efficiency.
3.Fit work for 50-500mm diameter without bevel cutting pipes.
द्रुत विवरण
सर्त: नयाँ
उत्पत्ति स्थान: अनहुइ, चीन (मुख्यभूमि)
ब्रान्ड नाम: ACCURL
Model Number: CNCUT-P
Voltage: 220V 50/60Hz single phase, plasma generator: 380V 3 phase
Rated Power: 2000W
Dimension(L*W*H): 3500*1000*1500/3500*1000*1500
Weight: 400kg
प्रमाणीकरण: सीई
Warranty: ONE YEAR
After-sales Service Provided: Overseas service center available
Item Name: Specialized Factory Working Precision 0.2Mm/Meter Pipe Saddle Cutting
Cutting Speed: 0-10000mm/min
Moving Speed: 0-10000mm/min
Cutting Depth:100mm
Cutting diamerter: 500mm
BEVEL CUTTING: 0.2mm
Program and ethyne gas cutting:available
बिजुली आपूर्ति: AC220V±10% 50/60HZ
Numbers of torch: one (flame or plasma) / can order two torches on one slider
Plasma generator: HYPERTHERM OR VICTOR
सम्बन्धित उत्पादनहरु
अटो ग्यास स्रोत सीएनसी प्लाज्मा काटने मेशीन प्लाज्मा स्टील कटर उत्तम समानान्तर चाल- सीएनसी पाइप प्रोफाइल काट्ने मेसिन
- सीएनसी ट्यूब कटर मशीन फाइबर लेजर 500w कारखाना निर्माण
- व्यास २ 250० मीमी र 000००० मिमी पाइप लम्बाइको साथ a आइक्सहरू सीएनसी प्लाज्मा पाइप काटनेको मेशीन
- शौक सीएनसी प्लाज्मा कटर, धातुको लागि सीएनसी प्लाज्मा ट्यूब काट्ने मेसिन
- cnc फाइबर लेजर धातु ट्यूब / पाइप काटनेको मेसिन राउन्ड / वर्ग / आयताकार / अंडाकार ट्यूबका लागि
- धातु शीट र ट्यूब पाइप काटनेको लागि सीएनसी फाइबर लेजर काटने मेशीन
- औद्योगिक पाइप काटने प्लाज्मा कटर
- धातु मेसिनरी सीएनसी प्लाज्मा वर्ग ट्यूब काट्ने मेसिन, सीएनसी पाइप कटर
- सीएनसी फाइबर लेजर धातु पाइप / ट्यूब काट्ने मेसिन आगो नियन्त्रण उद्योगको लागि
